750 Watt Permanent Magnet Alternator for Wind Turbine Generators by WindyNation
Alternator produces three-phase AC electrical energy (more environment friendly than DC electrical energy).Use our 80 amp 3-phase bridge rectifier to convert three segment AC present to DC for battery charging.Perfect for charging 12 and 24 volt battery financial institutions or a grid tie.Threaded shaft is designed to fit hubs with a 5/8 inch diameter center hole.16 huge #42H neodymium magnets, plus a ten lb (4.5 kg) copper stator!. The Windtura 750 is constructed from the top-down for producing serious power on custom-built wind generators. With its massive #42H neodymium magnets, this generator will make over 1100 Watts in three5 mph wind. Many small wind turbine energy curves violate the regulations of physics. This generator packs severe power--just evaluate the size and weight of this generator with most turbines which can be rated at "500 Watts". Inside, you'll in finding 16 large #42H neodymium magnets. These magnets are composed mainly of Neodymium (Nd), Iron (Fe) and Boron (B), and these high-grade uncommon earth magnets are probably the most powerful permanent magnets on earth! The Hardened metal shaft is coated with a polyurethane clear coat for defense. The magnetic rotor is utterly coated and sealed with an epoxy paint, and the sealed bearings are assured for a protracted existence. The Windtura 750 Copper Stator weighs over 10 kilos (4.5 kg) and that is outsized stator for optimum energy output. All of this comes in an hardened metal casing, with upgraded three04 stainless metal back and front quilts, 6061 extruded aluminum physique. The housing completely seals/protects copper stator and magnetic rotor and supplys very good corrosion resistance and heat dissipation.. ... Read more 750 Watt Permanent Magnet Alternator for Wind Turbine Generators
No comments:
Post a Comment